Bearings, as one of the most important components to support the rotation of machinery and equipment s, it needs to work in bad environment, and requires high on the Anti-fatigue strength and wear resistance. And it also proposes higher req...

1. The hardness of the bearings after heat treatment will be above HRC50, traditional cutting tools will be not wearable, low efficiency, what can we do? A: In order to obtain excellent performance and usage life, the manufacturers usually...

Bearing Steel(100Cr6,100C6,E52100), as one of the best steels, has been widely used in power industry, metallurgical and wind power industry. Because of the bad working environment, bearings steel need have the following advantages: High ha...

With the development of the hard turning lathe, turning instead of grinding already are widely used in bearings industry, and it will require high on the hard turning lathe and hard turning insert. Especially for the hard turning inserts, a...

Wind power bearings are often used in bad environment, use 42CrMo as the main materials, we use heat treatment to improve the wind power life, the hardness will be above HRC45 after that process, and the diameter is large, so it will requir...